BSA singles - engine parts
- AJS-Matchless / BSA Kickstart rubber (set of 3)
Condition: N.O.S.
Fits: Burman gearboxes -1958Made in England
(Sticker not included)€ 15,00 - Alpha Bearings BSA C15 Big end bearing assy Alpha part no. B21
Condition: N.O.S. Original Part No. 40-0720 crankpin 40-0572 roller cage 41-0183 bush 10326-0650 rollers (24)
Fits: 250 OHV unit singles 1958-1961 C15-C15S-C15T-SS80 until engine no. C15S2002
Made in England by Alpha Bearings€ 198,00 - Alpha Bearings BSA C15S-C15T-SS80 Big end bearing assy (B24)
Condition: N.O.S.
Fits: C15-types 1961-1963 from Eng. No. 3002
Made in England by Alpha Bearings€ 139,00 - B25 Starfire valves & guides set (68-0661 / 68-0662 / 40-931-32)
condition: NOS (spots on photos are dried conservation oil)
fits B25 250cc unit single
1967 - 1971€ 67,00 - B44 Victor Crankshaft assembly cplt. Partno. 41-546
Condition: Used, needs new big end bearing
Fits: All 441cc engines 1965-1971€ 364,00 - Boyer Ignition kit for BSA + Triumph 250 Singles (KIT00060)
Condition: NOS
6 volt
Fits: Singles -1970
Made in England€ 144,00 - BSA - Triumph 250 Crankshaft assy 70-9848 (40-1023)
Condition: Used, very good condition
STD size dia 36,4 mm, Std bearings available
Replaces part no's 71-2284, 70-9547, 70-8028
Fits: B25 - C25 - B25 SS - B25 T + Trophy 250 TR 25W 1967 - 1972
Made in England by BSA - Triumph€ 272,00 - BSA - Triumph 250 Singles Wiring harness (main) 19-1075 (Lucas nr LU 54959480) cloth braided
Condition: NOS
Fits: 250 Singles 1970-72
Made in England by Joseph Lucas Ltd€ 84,00 - BSA - Triumph Unit Gear cluster complete
Condiotion: Used but in very good condition
Fits: 1968 - TR25 W + B25 - C25 - B40 - B44 - B50
Made in England by BSA
57-3850 Camplate 57-2588 Selctor spindle 57-2689 selector forks (2x) 57-2661 Mainshaft 57-3872 High gear 22T…€ 297,00 - BSA / Alpha Bearings B31-B33 + M20-M33 Big end assy, Partno. 68-483, 65-1614, 66-481
Condition: N.O.S.
Fits: All OHV + S.V. singles 1937-1959 (except Gold Star)Made in England by Alpha Bearings€ 196,00 - BSA / CCM 500MX gear mainshaft 2nd 21T (57-3876 / 41-3064 / 57-2673)
condition: NOS
Made in England by BSAfits: CCM 4-sp 1973-1976
BSA B44 B50T B50SS B50MX Triumph T25 1968-1971€ 92,00 - BSA / Triumph mainshaft sleeve gear 22T (57-3872 / 40-3061)
condition: NOS
Made by fits B25 - B50 - TR25W 1968-
CCM 4sp -1977€ 128,00 - BSA + Triumph C15-DBD34GS Valve spring set, Partno. 40-1068, 40-0169
Condition: N.O.S.
Fits: C15-SS80-B40-B44-B50-DBD34GS 1956-1972Made in England by Terry's
(Sticker not included)€ 33,00 - BSA 250 C25 B25 crankshaft OPN 40-1024
Condition: used
Journal size 36.3 mm = 0.10 inch U.S.
Bearings available
Will fit unit 250 motors 1967-
OPN 40-1024€ 246,00 - BSA 250 singles B25 & C25 Cylinder head c/w new Alpha valves & guides (40-929)
Condition: Used
1968 -
Casting no: PBM40930
Made in England€ 268,00 - BSA A10 layshaft sliding gear 21T wide ration (67-3212)
condition: NOS
Made by BSAfits plunger type gearbox€ 139,00 - BSA B+M types Gearbox sprocket 18-19T (60-3506)
Condition: N.O.S.
Fits: B31-B32-M20-M21 Plunger types only
5/8" x 1/4" (520) chain only
Made in England€ 44,00 - BSA B25 - B44 layshaft 1st gear + bush (41-3087) 27T
condition: NOS Made in England
Bush = nr. 40-3262fits BSA unit singles B25-C25-B44 Victor (enduro) 1967€ 76,00 - BSA B25 - C25 / Triumph TR25W Oversize Piston assy complete (40-970 / 70-7998)
Condition: NOS
C.R 10:1 .040" oversize (68 mm)
Fits all Unit Singles 1967 - 1973
Made by Hepolite€ 118,00 - BSA B25 - C25 Primary cover assy 71-7025
Condition: Used & welded. needs polishing
Casting nr 71-7026
Fits: B25 SS + T B50 T - SS + MX Victor 1971 -
Made in England€ 95,00 - BSA B25 -C25- B44 - B50 layshaft + 4th gear 14T opn. 41-3068 (57-2667)
Condition: NOS Made in England
Fits ; BSA + Triumph Unit-singles 1967-€ 156,00 - BSA B25 / Triumph TR25W Clutch repair kit, Partno. 57-2726, 57-2725, 57-2727, 57-7856
Condition: N.O.S.
Consists of: 4 driving plates + 5 driven plates + 4 springs + 1 cover gasket
Fits: Unit singles 1971-Made in England€ 98,00 - BSA B25 / Triumph TR25W Conrod (40-0908 / 70-8836 / 70-9911)
condition: reconditioned
Made in Englandc.w. new std. bearings
fits 250 unit engines BSA-triumph 1967-1972€ 158,00 - BSA B25 / Triumph TR25W Large oversize piston (70-8273 / 71-1803)
condition: NOS Made in Italy by GPM
CR 9.5:1 Sizes 69 mm or 69.5 mmfits: 250 unit singles 1967-1972€ 138,00 - BSA B25 + Triumph TR25W Conrod assy (40-0908) 70-8836
Condition: Slightly used
Big-end bearings available STD + Over sizes
Fits: 250 Unit Singles 1967 - type with Gudgeon pin bush
will fit later types - 1972 (70-9911)
Made in England€ 124,00 - BSA B25 Barracuda & Starfire 250 single Piston complete by G.P.M. (40-970)
Condition: NOS
1967 - 1972
oversize 68.6 m
Made in Italy€ 138,00 - BSA B25 C25 valves & guides set (68-0661 68-0662 40-931)
condition: NOS
fits: 250 unit singles 1967-€ 67,00 - BSA B25 Cylinder liner opn 70-9265
Condition: New stock
Fits 250 Unit singles 1967-
Made in England€ 92,00 - BSA B25 Inspection cover Rockerbox 40-0966
Condiotion: NOS
Fits: 1971- B25SS - B25T - Triumph T 25 SS + T 25 T
Also B25 - C25 1967-
Made in England by BSA - Triumph€ 39,00 - BSA B25 Kickstart Quadrant, Partno. 40-3267
Condition: N.O.S.
Fits: 250 Unit singles with 5/8" spindle (c/w needle bearing)Made in England€ 144,00 - BSA B25-B44 Kickstart Quadrant 57-4070
Condition: N.O.S.
Fits: BSA Unit singles with 3/4" shaft
Made in England€ 144,00 - BSA B25-B44 Rear brake plate anchor stay 41-6094
Condition: N.O.S.
Fits Unit Singles 1967 with QD rear wheel
Made in England€ 19,00 - BSA B25-B50 Clutch repair kit, Partno. 57-2726, 57-2725, 71-1418, 40-3231
Condition: N.O.S.
Consists of: 5 driving plates + 5 driven plates + 4 springs + 1 cover gasket
Fits: Unit singles 1971-Made in England
(Sticker not included)€ 116,00 - BSA B25-B50, Triumph TR25W Gear change quadrant cplt 57-2692 (40-3321)
Condition: N.O.S.
Fits: All unit motors 1966-1972
Made in England by BSA-Triumph€ 189,00 - BSA B25-C25 / Triumph TR25W-T25SS Piston cplt std (Triumph no. 70-7998+71-1801 / BSA no. 40-970)
Condition: N.O.S. Made in Italy by GPM
Fits all: Triumph unit singles 1967-1972 & 250 BSA unit singles 1967-1972
Compr. Ratio: 9.5:1 Std size = 67 mm.€ 138,00 - BSA B25-C25 Triumph TR25W-T25SS Crankshaft, Partno. 40-1023
Condition: Used, overhauled
Ground to .020" US c/w new bearings
Fits: 250 Singles 1967-1971€ 365,00 - BSA B25SS / Triumph TR25W crankcase complete (70-8000) (70-9371)
Condition: Used but very good condition Engine Number : XC9661TR25W Fits BSA + Triumph Unit Singles 250 cc 1968-1972
All bearing have a tight fit.€ 315,00 - BSA B25SS-B25T Crankcase DS (71-1869)
Condition: Used
Fits: B25 Unit singles 1971-
Also fits: Triumph T25SS, T25T 1971- (castingnr: 71-1825)€ 138,00 - BSA B31 - B33 Pushrod cover tube (65-1080)
Condition: Used
M33 pre-unit singles
1949-1960
Lenght 238 mm€ 59,00 - BSA B31 Oversize piston 71.5 mm
Condition: N.O.S.
Fits: 350cc OHV single B31 B32 1946-1959
Dia: 71mm + 0.020" o.s.€ 128,00 - BSA B31-B32 Piston ring set (3660 Hepolite)
Condition: N.O.S.
Fits: 348cc OHV Gold Star 1946-1957
Std dia: 71mm
Oversizes dia: 71.5mm and 72mm€ 37,00 - BSA B31-B32 Set of 2 valves + guides (65-1111 / 65-1110)
Condition: N.O.S.
Fits: 350 OHV pre-unit singles 1950-1960
Made in England€ 84,00 - BSA B31-B33 A7-A10 Kickstart quadrant, Partno. 42-3160
Condition: N.O.S.
Fits: Pre-unit gearboxes 1954-1963 Singles & Twins Except DBD34 Gold Star
Made in England€ 148,00 - BSA B31, B33, M20, M21 Big end bearing complete (66-481 / 483) (65-1614)
Condition: New stock
Fits all Pre-unit Singles 1937 - 1960 Execpt DBD34GS€ 212,00 - BSA B33 - M33 - B34 exhaust valve & guide (65-1240 / 65-1516)
Condition: N.O.S.
Fits: 500 OHV pre-unit singles 1946 - 1958Made in England by Alpha Bearings€ 44,00 - BSA B33 M33 B34 Set of 2 valves + guides (65-1239 / 65-1240 / 65- 1516)
Condition: N.O.S.
Fits: 500 OHV Pre-unit singles 1946-1960
Made in England by Alpha Bearings€ 86,00 - BSA B33-B34 Piston ring set
Condition: N.O.S.
Oversize piston ring set 85mm + 1mm
Fits: 1952-1957 Gold StarMade in England
(Sticker not included)€ 39,00 - BSA B40 350 cc OVH Unit Single Conrod c/w bushes (41-233)
Condition: NOS Casting nr. 41-234
Fits 1960 -
Size S.E. Bush dia 11/16" bottom end 45 mm bush
Made in England€ 138,00 - BSA B40 - 350 Star Set of valves & guides (41-22/23/17)
Condition: NOS
Fits 350 CC unit motors 1960 - 1963
Made in England by Alpha Bearings Ltd
(Sticker not included)€ 72,00 - BSA B40 / B44 rockerbox complete with rockers, valve lifter etc. (40-0415)
Condition: Used
1960 - 1970€ 164,00 - BSA B40 conrod c/w bushes opn. 41-233
Condition: NOS
B40 - 350 Star - SS90 needle bearing type gudgeon pin bush = 3/4" inner dia
1960 - 1964 Casting nr, 41-234€ 138,00 - BSA B40 Conrod c/w Bushes (41-233)
Condition: N.O.S.
Conrod c/w bushes
Fits: 350 unit singles 1964-1967
Casting nr: 41-234 Gudgeon pin bush = 3/4" inner dia. Bottom bush is 45 mm inner dia.€ 138,00 - BSA B40 Crankshaft Assy, Partno. 41-0233 (41-0288, 41-0292, etc.)
Condition: Used, good condition (no play on conrod)
Fits: 350 Unit singles 1962-€ 298,00 - BSA B40 Piston assy cplt, std size, Partno. 41-0250
Condition: N.O.S.
Fits: 350 Unit singles B40 1960-
Std size 79mm
Casting nr 41-251 BSA
Compr. ratio 8:1Made in England by BSA€ 158,00 - BSA B40 Piston Std/Oversize .020"/.040"/.060" (41-0250/41-0252/41-0254/41-0254-1)
Condition: New stock
Piston cplt for 350 unit singles 1960-1968
C.R. 8:1
Std size: 79mm (41-0250)
Oversize .020": 79.5mm (41-0252)
Oversize .040": 80mm (41-0254)
Oversize .060": 80.5mm (41-0254-1)€ 136,00 - BSA B40 primary chain case cover (40-0245) used
condition: used, damage welded
fits BSA & Triumph unit singles Replaces: 70-9427€ 118,00 - BSA B40 primary chain case cover (40-0245) used
condition: used, dented at footrest
fits BSA & Triumph unit singles Replaces: 70-9427€ 118,00 - BSA B40-B25-B44 / Triumph TR25W Clutch centre & sundries, Partno. 41-3210 / 57-2724
Condition: N.O.S.
Fits: All unit singles with 4 driving plates
Includes 4 rivets + 8 rubbersMade in England€ 72,00 - BSA B40-B44 Clutch repair kit, Partno. 40-3233, 40-3220, 41-3091, 70-7856
Condition: N.O.S.
Consists of: 4 driving plates + 5 driven plates + 4 heavy duty springs + 1 cover gasket
Fits: unit singles -1971Made in England
(Sticker not included)€ 98,00 - BSA B40-B44 piston ring set GPM Standard + Oversizes
condition: NOS
made in ItalyStd size = 79 mm + .020" oversize is 79.5 mm +.040"= 80 mm + .060" = 80.5 mm
fits 350 - 440cc singles Width: piston rings 1/16" Oil ring 1/8"€ 47,00 - BSA B40-B44- + C15 rocker box, bare opn 40-0415
condition: used, in good condition
Made in England by BSAcasting no. 40-206€ 94,00 - BSA B44 Conrod c/w bushes (41-0549) (41-550)
Condition: Used, but very good
Dia Gudgeon pin 3/4" bottom end 45 mm
Casting nr 41-550€ 138,00 - BSA B44 Piston oversize (41-0570) 82.5 mm
Condition: N.O.S.
Large oversize piston : 82.5mm (3.5mm O.S)
Fits: 441CC Victor GP MX + Enduro 1965-
Alloy barrel only
Made in Italy by GPM€ 199,00 - BSA B44 set of gaskets with oil seals and thrust washers
condition: new stock
Made in Englandfits B44 Victor special and enduro 1968-1971€ 69,00 - BSA B44 Victor JP piston cplt .020" Oversize. 41-0572
condition: New Stock
Made in Australia by JP Pistonsfits: 441cc singles + CCM 350 trails
1965-
C.R. 9.4:1€ 212,00 - BSA B44 Victor Pair of valves & P.B. valve- guides Opn. 41-0024/0023/0632
Condition: NOS
Fits 1965 - 66 round barrel type
Made in England€ 84,00 - BSA B44 Victor - Enduro + MX 1965-1968 - Conrod Assy (41-0548)
Condition: Used
Conrod & Crankpin assy. In good condition.
Casting NR: 41-0550
Fits: B44 Victor Enduro + MX 1965-1968€ 168,00 - BSA B44 Victor .020" oversize Genuine BSA piston, Partno. 41-0572
Condition: N.O.S.
Fits: All 440 singles 1965-1971
C.R. 9:1
Piston nr: 41/575Made in England€ 196,00 - BSA B44 Victor Big end assembly, Partno. B26S, (41-0550), (TE10-11-12-13)
Condition: N.O.S.
Fits: CCM TR350 Trials 1979-1980 + BSA Victor 440cc 1965-1968 (for Conrod nr. 41-550)Made in England by Alpha Bearings€ 292,00 - BSA B44 Victor crankshaft cplt. (41-546)
condition: slightly used, original nice condition, ready to fit (No play)
Made in England by BSA Fits: 440 cc Singles 1965-1970 Victor MX + Enduro (Round + Square barrel-types€ 420,00 - BSA B44 Victor crankshaft cplt. (41-546)
condition: slightly used, original nice condition, ready to fit (No play)
Made in England by BSA Fits: 440 cc Singles 1965-1970 Victor MX + Enduro (Round + Square barrel-types€ 420,00 - BSA B44-B50 Camshaft cplt (71-1680)
Condition: Used Very nice condition
Fits: B44 Victor with 3/4" inner dia camshaft bushes + B25SS-B25T -B50SS-B50T models 1971-1973€ 168,00 - BSA B44-type Dural engine sprockets Duplex (replaces 41-615)
condition: NOS
Made In England by CCM-BoltonChoice of : 20T 21T 22T 24T
for Trails - MX purpose€ 57,00 - BSA B44GP Connecting rod, Partno. 41-0549
Condition: Used
Fits: 440cc unit singles B44G-B44VE-B44VR-B44VS 1965-1970€ 136,00 - BSA B50 camshaft + cam wheel - code 'O' (71-1680)
condition: NOS
Made in England by BSAmarked 'O'
fits:
CCM 500-600MX 2v
B50T-SS-MX 1971-€ 292,00 - BSA B50 / Triumph TR50MX / CCM 500MX Clutch centre & sundries, Partno. 57-4511 (57-4186)
Condition: N.O.S.
Fits: All unit singles with 5+5 clutch platesMade in England€ 72,00 - BSA B50 Allen Screw kit stainless steel
Condition: New Stock
UNC 1/4" + 2 x 2BA Replaces part nos 14-6610 - 11 -12 -
Fits: B50 MX Victor B50 T - B50 SS + B25 SS - B25 T + Triumph T25 T - T25 SS 1971 - 1973
Made in England€ 27,00 - BSA B50 fuel pipe assy. (83-3040)
condition: NOS
Made in England by BSAfits: BSA B50 Trail + SS (UK+US) 1971-1973€ 48,00 - BSA B50 Hepolite piston oversize opn 71-2148 Slipper type Hepolite nr 19267
Condition: N.O.S.
Genuine hepolite piston cplt 0.50mm
Oversize 84.5mm
C.R: 10:1
Made in England€ 224,00 - BSA B50 Oversize piston cplt (71-2150) Slipper type
Condition: N.O.S.
Fits: Victor 500MX B50T-B50SS + DBD34 Gold Star + CCM 500MX
Large oversize: 85.5mm (+.060")
Made in Italy by GPM€ 224,00 - BSA B50 set of gaskets - oil seals - thrust washers
condition: new stock
Made in Englandfits B50T - B50SS - B50MX 1971-1973€ 59,00 - BSA B50-500MX Oil pump cplt (71-2228/71-3001)
Condition: N.O.S. From dismantled new CCM 500MX engine
Fits: BSA B25-B50 Victor 1971- and CCM 500-600 1974-
Made in England€ 239,00 - BSA B50-B25-TR25W Alloy Clutch chainwheel, 52T (57-4303-A)
Condition: New stock
Fits: all BSA/Triumph unit singles 5 plate clutches 1963-
Made in England€ 136,00 - BSA B50-CCM pushrods (71-1620 / 71-3657)
condition: NOS
Made in England by BSAfits: B50T-SS-MX 1971-
CCM 500-600 2v 1973-priced per pair€ 58,00 - BSA B50MX B50T B50SS Kickstart Quadrant + Needle bearing (57-3639)
Condition: N.O.S.
Fits: 1972 B50 with stepped shaft
Made in England€ 132,00 - BSA B50MX Cyl. head + base & rockerbox gaskets, Partno. 71-1625, 71-1624
Condition: N.O.S. Made in Emgland by BSA-Triumph
Fits: All 500 unit singles 1971- 1974 + CCM 500MX 2-Valve 1973-1980€ 31,00 - BSA B50MX Piston cplt oversized (84.5mm), Partno. 71-2749
Condition: N.O.S.
Fits: BSA 500 Unit singles 1971 + CCM 500 2V 1973-
Made in England by AE Hepolite€ 224,00 - BSA B50MX Valve & guide set, Partno. 71-1735+36, 71-1726+27
Condition: N.O.S.
Fits: 500cc Unit singles 1971 + CCM 500MX 1973-1974Made in England for BSA€ 77,00 - BSA Bantam 2-stroke piston std/0.010" o.s. (Hepolite 10399)
Condition: N.O.S.
Fits: Type D1 Bantam 123CC 1947-1963
Std size: 52mm diameter
Oversize 0.010": 52.3mm
Made in England€ 68,00 - BSA Bantam D1 Oversize Heplex piston, Partno. Heplex 10339
Condition: Slightly used
Fits: 125cc Two-stroke 1947-1963
Dia: 53.3mm€ 58,00 - BSA Bantam Piston ring set M83 (R5560HEP)
Condition: N.O.S.
2 Std piston rings 57mm x 3/32"
Fits: Bantam Major 150cc 1954-1958
Made in England by WellworthyLetterpost possible€ 19,00 - BSA Bantam two stroke, piston ring set (90-1311) Hepolite R23080
Condition: N.O.S.
Std rings for: 173cc: D10 - D14-4 - D175, 1967-1970
Dia: 61.529mm x 1/16"
Letterpost possible
Made in England€ 19,00 - BSA C10 - C10L 250 SV Pair of inlet & exhaust valves (29-2120-2121)
Condition: NOS Made in England by tranco Valves in Silicon Chrom
Fits : 1939 - 1957€ 49,00 - BSA C10 / C10L 250 pair of inlet & exhaust valves (29-2120 / 2121)
condition: NOS
pair of inlet & exhaust valvesfits: BSA C10, C10L 250 1939-1957€ 54,00 - BSA C10 + C10 L side valve engine inlet + exhaust valves ( silicon chrome) + valve guides
Condition: NOS
1937 - 1957
Made in England by Tranco Valves Priced and sold per pair. Including valve guides (not shown in picture)€ 69,00 - BSA C10 L - C11 G - C12 Clutch plates set 29-3476 67-3240 /41
Condition: NOS Made in Italy by Surflex
Fits: 250 SV + OVH 1954 - 1958 Consust of: 2 Bonded plates 1 Steel plate 1mm 1 Steel plate 1.6 mm€ 58,00 - BSA C10-B33-A7 Steel clutch plate (set of 5) (29-2832)
Condition: N.O.S.
Set of 5 plates
Fits: BSA singles & twins M20, M21, A7, A10 S.Arm, M33, B33, B34, C10, C11
Made in Italy by Surflex€ 74,00 - BSA C10L-C12 Kickstart Level cplt (65-3381)
Condition: N.O.S.
Fits: Light 4-speed gearbox of 250 SV + 250 OHV -1957
K.S. Spindle dia 3/4"
Made in England€ 79,00 - BSA C11 - C11G - C12 Pair of valves 65-208 / 37
Condition: NOS
Fits 250 Pre-Unit Singles 1939 - 1958
Made in England by Alpha Bearings€ 44,00 - BSA C11G Gearbox sprocket 17T for 3-speed gearbox only, Partno. 29-3432
Condition: N.O.S.
Fits: 250cc OHV 1954-1957€ 39,00 - BSA C15 Crank pin (big end) Part No 40-0720
Condition: N.O.S.
Fits: 250-350 Unit singles 1958-1966C15 C15S C15T
Outer dia: 15/16" + 1 3/8"
Width: 2 7/32"Made in England by BSA€ 72,00 - BSA C15 - B44 Genuine mainshaft gearbox (40-3254)
Condition: NOS Made in England by BSA-Brimingham
Fts 250-350 Unit engines : C15 Star -Sport Star - B 25 - C25 - B40 - B40 - B40WD - B40 Enduro Star -B44- B44 Enduro Star 1958-€ 94,00 - BSA C15 Conrod Assy
Condition: NOS
Fits C15 T + S 1959 - 1961
Casting nr 40 - 48
Big-end dia : 1 3/8" + 15/16"
Made in England€ 192,00 - BSA C15 conrod c/w bushes (40-48)
condition: NOS, Made in England
fits: 250 unit singles C15S + C15T 1959-1961€ 124,00 - BSA C15 Piston complete + .020" oversize 57.5 mm (40-0639) (40-447)
Condition: NOS
Fits C15, C15 Star, C15 Sportsman, 250 Star + SS80 Sports Star
1959 - 1966
Casting nr 40-447
Made in England by BSA€ 132,00 - BSA C15 piston cplt. 67.3mm (opn 40-467 / 40-445)
condition: NOS
Made in England by BSAfits 250 unit singles C15 Star + Sport Star€ 112,00 - BSA C15 Piston oversize, Partno. 40-447
Condition: N.O.S.
Fits: 250 OHV Singles 1959-1966 C15 C15S SS80
Diameter: 67.5mm
C.R. 10:1Made in England by BSA
(Sticker not included)€ 138,00 - BSA C15 set of valves & guides (opn 40-165 / 40-166 / 40-133)
condition: NOS, Made in England by Alpha Bearings
fits: 250 OHV singles 1959 - 1966 C15 C15T C15S + SS80€ 64,00 - BSA C15- B40 Crank pin only, Partno. 40-0720
Condition: N.O.S.
Fits:250- 350 Unit engines 1961-1965
Outerdia: 1.5" + 1"
Width: 2 7/32"Made in England by BSA€ 72,00 - BSA C15-B25-B50 / Triumph TR25W Clutch sprocket, Partno. 57-4198 (57-4303, 40-3203)
Condition: N.O.S.
Fits all 250-350-440-500 BSA + Triumph singles 1958-1980 (will take 5+5 clutch plates)Made in England€ 132,00 - BSA C15-B40 Gearbox sprocket (40-3052/40-3123)
Condition: N.O.S.
Fits: 250-350 Unit singles 1958-1967
(For 428 chain)
Made in England€ 33,00 - BSA C15S + T conrod assy. cplt. opn. 40-48
condition: NOS
Made in England by BSAfits 250 singles OHV 1959 - 1962
Supplied c/w big-end pin€ 196,00 - BSA C15SS80 STD Piston, Partno. 70-8767
Condition: N.O.S.
Fits: 250 Singles 1958- (67mm)
nr. 17897AMade in England by Hepolite AE
(Sticker not included)€ 98,00 - BSA C25-B25 / Triumph TR25W Clutch centre & sundries, Partno. 57-4186 (57-4511)
Condition: N.O.S.
Fits: All unit singles with 5-plate clutch 1971-Made in England€ 72,00 - BSA clutch chainwheel 43T bonded (42-3223 / 42-3224)
condition: NOS
Made in Englandfits A + B types with 6-spring clutch
A7 - A10 1957-
B33 - DBD34 1957-€ 172,00 - BSA clutch plate bonded set of 4 OPN 67-3242
Condition: NOS
Fit: BSA
C10 - C11 1946 - 1953
B31 - B32 1946 - 1957
M20 - B34 1948 -
M33 - B33 1957 OPN 67-3242
A7 - A10 swing-arm type 1948 - 1957
Made in the USA Priced and sold per set€ 58,00 - BSA clutch pullrod 6-spring clutch (42-3108)
condition: NOS
Made in Englandfits: B31 - B33 - A7 - A10
size: 1/4" x 29.3mm€ 19,00 - BSA clutch pullrod plunger-type (66-3067)
condition: NOS Made in England With hardened steel ends fits; B31-B33 plunger types a.o. 1/4"x 30.2 mm.
Made in England€ 19,00