BSA singles - frame parts
- Armstrong shocks fully shrouded 11.9" / 300 mm (3/8" bushes)
Condition: New stock
Length: 11.9" 300 mm
Bushes 3/8"
Fit BSA C15 - B40
1962 - 1967Priced and sold per pair.€ 121,00 - Armstrong shocks fully shrouded 12.9" / 330 mm (3/8" bushes)
Condition: New stock
Length: 12.9" 330 mm
Bushes 3/8"
Fit BSA B25 - B44
1967 - 1970 Priced and sold per pair.€ 121,00 - BSA Unit Singles OIF B50 MX Victor Motocross + Trail Handle bar chrome plated opn. 97-4062
Condition: NOS
Fits: 250 Unit Singles B25T Victor Trail 1971- + B50T Victor 500 Trail + B50MX Victor 500 MX 1971-1973
Made in England€ 78,00 - BSA -Triumph Driving Flange QD rear hub opn .42-6019 (37-2314)
Condition: NOS Made by BSA-Triumph
Fitts most A & B types B31-B33-DBD34-B44-A50-A65 Also Triumph 250 Singles TR25W 1968-1970€ 46,00 - BSA / Triumph brake plate bare for 7" conical rear wheel hub Opn. 37-3856 ( 37-3857)
condition: NOS
models: BSA + Triumph Singles- Twins and Triples 1971-1973 (BSA A75 and Triumph X75 excluded) OIF-type 7" conical rear wheel hub only€ 124,00 - BSA / Triumph 7"Duplex Front brake shoes Partno. 37-1996
Condition: N.O.S.
Fits: All types with 8" TLS Full width hub 1968-1970
Casting nr. 37-1997Made in England€ 47,00 - BSA / Triumph OIF-types Swinging-arm spindle complete 83-3554 / 83-3556 / 21-0755
Condition: NOS
Fits all BSA and Triumph singles OIF-type
1971 - 1973€ 59,00 Fits: Full width cast iron hubs : 7" in 18"rim + 8" in 19" rimm.
BSA / Triumph stainless steel spoke set (40 pcs) (37-1708 / 37-1709 / 37-1328 / 37-4200)Condition: New stock
40 spokes & nippels for 19" front wheel
Full width 8" front brake
1968 - 1971
Made in EnglandPriced and sold per set.€ 68,00- BSA + Ariel B31- B33- A7- A10 SS spokes set Part. No: 42- 5635+27- 6813
New stock
Fits all singles & Twins with full width alloy hubs & 19"rims
Made in England€ 68,00 - BSA 250-500-650-750 OIF models set of 40 ss spokes & nipples
New stock
Made in England
For conical rear hub 18" only
Fits: B25-B50-A65-A75 1971-1973€ 68,00 - BSA 350 WD Army bike Spares Kit genuine
NOS
Made in England
Genuine spares kit for BSA B40GB / WD ±1967
Contents:- throttle & clutch cables
- pluglead & champion cap
- fuel pipes
- air filter rubber€ 69,00 - BSA 500 Victor B50 MX silencer, upper side (71-3750)
Condition: NOS
1972 - 1973
Made in England will also fit Triumph badged singles '71 - '73€ 158,00 - BSA A - B - M types steering head bearings set complete (66-4149 / 65-5126)
Condition: NOS
1952 - 1970Priced and sold per set.€ 49,00 - BSA A / B type fork bush & seal kit opn. 65-5424 / 29-5347 / 29-5313
Condition: NOS Made in England
BSA C10 C11 C12 B31-B32-B33-B34 M20-M21 A7-A10 A50-A65 1962-1968 B25-C25 1967-1968 B44 Victor Enduro 1966-1970
+ Triumph Tr25W -1968
Priced and sold per set.€ 58,00 - BSA A10-A65-B33 Hollow swinging arm spindle c/w silent blocks, Partno. 42-4340/42-4362
Condition: N.O.S.
Fits: Unit + Pre-unit singles & twins with cross over rear brake (pre 1969)Made in England€ 138,00 - BSA A50-A65 fork stanchions assy. Early type opn 68-5030
Condition: NOS Made in England
Fits A50-A65 1962-1964 Total length: 21.2" = 537 mm
Set c/w 4 bronze bushes + 2 fork seals (not illustrated)€ 164,00 - BSA B25 - B44 duplex 7" front brake plate (37-3429)
condition: NOS
made in England by BSA-Triumph€ 227,00 - BSA B25 / Triumph Trophy 250 lower yoke + stem (97-2526)
condition: NOS
model years: 1968-1970€ 98,00 - BSA B25 Exhaust heat shield chrome plated 70-9415 / 70-9818
NOS
Fits B25 1967-
with upswept silencer
OPN 70-9415 / 70-9818€ 72,00 - BSA B25 SS - B50T etc. fork stanchions (97-4007)
Condition: NOS
1971 - 1973 OIF
For conical hub
Length 560 mm, chrome plated
Made in EnglandPriced and sold per pair.€ 124,00 - BSA B25-B50 / Triumph T25SS Footrest RH, Partno. 83-3017
Condition: N.O.S.
Fits: OIF Singles 1971-
Casting nr: 83-3018Made in England€ 49,00 - BSA B25-B50 / Triumph TR25W Spindle + nut & Swinging arm needle bearings, Partno. 83-2013/21-0755/83-2245
Condition: N.O.S.
Fits: BSA-Triumph singles OIF 1971-Made in England€ 64,00 - BSA B25-B50 brake pedal 83-2040
Condition: NOS
Fits BSA B50 MX Victor Moto cross + B50 T Trail
B50 SS Street Scramble
1971-1972
Will also fit Triumph badged machines€ 72,00 - BSA B25-C25 Barracuda silencer (40-2841/70-9653)
Condition: N.O.S.
Fits: BSA Barracuda + other 250 unit singles 1967-1971 C25-B25
Made in England by BSA-Triumph€ 158,00 - BSA B25-C25-B44-D10 Support plate (68-6835)
Condition: N.O.S.
Fits: Unit singles 175-250-350-440cc 1966-
Made in England by BSA€ 39,00 - BSA B25SS Gold Star 250 - B50SS Gold Star 500 dual seat 83-2621
Condition: NOS
1971 - 1973 OIF type only. Part No. 83-2621
Made in England by P&P Seating€ 258,00 - BSA B25SS, B50SS genuine pair of handlebars 97-4173
New stock
Made in England
Fits: BSA OIF Enduro models 1971 - 1973
OPN: 97-4173€ 47,00 - BSA B31-B32-A7-A10 Brake linings (DIY kit), Partno. W1008
Condition: N.O.S.
Fits: 1956-1957 Front + rear wheel hubsMade in England€ 29,00 - BSA B31-B33 Exhaust pipe
Condition: N.O.S.
Fits: 350-500 OHV Singles 1954-1959 s/arm type 1 5/8" diaMade in England€ 84,00 - BSA B31-B33 Silencer
Condition: N.O.S., slight dent at rear end (see picture)
Fits: 350-500 Singles plunger models 1948-1953
Inlet size: 1 5/8"
Made in England by Brituro€ 89,00 - BSA B31-B33 Silencer (BES 23A)
Condition: N.O.S. (Slight scratch at rear side!)
Fits: 350-500 OHV Pre-unit singles 1958- (s.arm type)
Inlet dia: 1 5/8"
Made in England by Brituro€ 124,00 - BSA B40 - B44 hollow swingingarm spindle + nut 42-4244
NOS
Made in England
Fits: B40 - B40 Enduro + WD + B44 350cc singles 1960-1968
OPN: 42-4244 + 42-4343€ 44,00 - BSA B40 Enduro Star + Army WD 350 cc Front mudguard steel Army green (40-6571) (15.140-6571)
Condition: NOS, shop soiled
1960 -€ 124,00 - BSA B40 Enduro Star Instrument holder (68-9139)
Condition: N.O.S.
Fits: 350 Unit singles 1962-
Made in England by BSA€ 39,00 - BSA B40 Exhaust pipe, Partno. 41-2714
Condition: N.O.S.
Fits: 350 unit singles 1960-1968
Dia: 1 3/8" - 35mm
Slightly curved on bottom pieceMade in England€ 86,00 - BSA B40 rear hub (40-6072)
comes complete with spindle and bearings
condition: NOS
model years: 1960€ 98,00 - BSA B40 Tail lamp extension (68-6795)
Condition: N.O.S.
Fits: C15-B40 1958-1966
Made in England€ 39,00 - BSA B44 - 441 CC silencer, high level (41-2725)
Condition: New stock
1969 - 1970
Made in England€ 158,00 - BSA B44 oiltank & side-panels "441 Shooting Star"
Condition: Used
Also fits B25 & C25 1967-
OPN: 40-8444 + 40-9178€ 246,00 - BSA B44 Victor Enduro swinging arm cplt. 40-4238
condition: NOS Made in England by BSA
Complte with silent blocs opn. 40-4241
model years: approx 1965-1970€ 242,00 - BSA B44 Victor GP exhaust pipe, high level
Condition: New stock
1966 - (Round barrel)
Diameter: 1.3/8" 35 mm
Made in the UK€ 95,00 - BSA B44 Victor Special silencer, high level type (1 3/8" inlet) (opn: 41-2725)
Condition: NOS
1970
Made in England€ 144,00 - BSA B44 VS exhaust pipe, high level (41-2722)
Condition: New stock
1970 -
Diameter: 1.5" 35 mm
Made in the UK€ 95,00 - BSA B44 VS side panel fibre glass LH, red opn. 41-9159 (40-9179)
condition: Used
model years: - 1970
left hand side€ 92,00 - BSA B50 MX Victor 500 Fork stanchions Extra High Tensile +HC (97-4455)
Condition: New Stock Made in England Hard Chromed High Tensile Steel Total length"55.7 mm.
Fits B50 MX Victor 500 1971 - 1973 2 Fork oil seals included (97-4001)€ 158,00 - BSA B50-A65-A75 Front brake cable c/w micro switch (60-3557)
Condition: N.O.S.
Fits: All 1971- OIF models with conical fronthub (8")
Replaces part no: 60-3075
Made in England by BSA€ 47,00 - BSA B50SS Street Scrambler Front brake heavy duty cable c/w stoplight switch (60-3075)(60-3557)
Condition: NOS
1971 - 1973
OIF models only
Made in England by Makolite€ 39,00 - BSA B50T B50SS B50MX 500 cc, OIF Bottom fork yoke cast alloy (97-3987)
Condition: NOS Made in England by NVT Also fits Triumph Trophy Trail TR5T 1973- (97-4313)
€ 192,00 - BSA B50T B50SS B50MX brake pedal (83-2040)
condition: NOS
model years: 1971- From now on : Only available in black colour.€ 72,00 - BSA Bantam Chainguard (90-7736)
Condition: New stock
Fits: Bantam types D7, D10, D14 1958-1965
Made in England€ 84,00 - BSA Bantam D7 - D10 - D14 Pair of brake-shoes 125 - 150 -175 cc (90-5719)
Condition: New stock
1954 - 1971
Complete with springsPriced and sold per set.€ 27,00 - BSA Bantam D7 Rear number plate complete (90-6748)
Condition: NOS
Complete with Lucas - type rear lamp and reflector
Fits D7 - D10 - D14 - B175€ 86,00 - BSA Bantam D7 Rear number plate complete (90-6748)
Condition: NOS
Complete with Lucas - type rear lamp and reflector
Fits D7 - D10 - D14 - B175€ 86,00 - BSA Bantam exhaust pipe
NOS
Made in England
For: 150-175cc D3, D5, D7 1952-1960
Diameter: 1 3/8" (35mm)
Length: 460mm€ 49,00 - BSA Bantam Haynes manual
condition: NOS
Bantam all types 1947 - 1971
printed in England
85 pages€ 36,00 - BSA C10-C11-C11G Silencer (Z638)
Condition: N.O.S.
Fits: 250cc SV plunger models 1946-1955
Inlet size: 1 1/2"
Made in England by Campbell's€ 127,00 - BSA C11-C25-B25-B44 + A10 Plunger Oil tank filter (82-9071)
Condition: N.O.S.
Fits: Unit singles + C11-A10 Plunger
Made in England€ 37,00 - BSA C15 - B40 - B44 Brake - shoes front + rear (40-5525)
Condition: NOS
Fits full width hubs
Made in England€ 33,00 - BSA C15 - SS80 fork covers US-type (40-5156, 40-5157) - used
condition: used, fair condition
fits 250 unit singles 1961 - 1965 ao.€ 118,00 - BSA C15 & B40 250 - 350 cc singles Number plate holder (42-6887 / 68-6807)
Condition: NOS
1958 - 1965
19 cm wide, 21.5 cm hight€ 96,00 - BSA C15 brake drum and rear wheel sprocket 45T (40-6018)
45T 1/2"x 5/16"chain (428)
condition: NOS
model years: approx 1967€ 92,00 - BSA C15 Star 250 cc single exhaust pipe
Condition: NOS
1958 -
Dia 1 3/8" 35 mm
Made in England€ 84,00 - BSA C15 Toolbox cover, Partno. 40-9003
Condition: Used
Fits: 250 singles C15 Star - Sports Star - SS80 1959-1966Made in England€ 88,00 - BSA C15 Toolbox cover, Partno. 40-9003
Condition: Shop soiled
Fits: 250 singles C15 Star - Sports Star - SS80 1959-1966
Original red colourMade in England€ 98,00 - BSA C15-B40 Jiffy-stand, Partno. 40-4729
Condition: N.O.S.
Fits: 250-350 Singles 1960-68
Casting nr: 40-473
Length: 232mmMade in England
(Sticker not included)€ 68,00 - BSA C25 - B25 / Triumph TR25W piston ring set (70-6838, CP211 / R23010)
condition: NOS Made in England Sizes available: STD (67 mm) + .020" .040" .060" Oversizes
fits 250 unit motors 1959-1966 C15 Sportsman 250 Star SS80 Sports Star
oil ring = 1/8" piston rings 1/16" wide€ 37,00 - BSA C25 Barracuda silencer (40-2841)
condition: NOS
Made in England by Brituro silencersinlet dia: 1 3/8"
total length: 65cmfits BSA 250 unit singles C25 -B25 (also C15 + B40)€ 158,00 - BSA C25-B25-B40WD Tail lamp + support, Partno. 68-6823 + 19-1245
Condition: Used (genuine Lucas lamp)
Fits: Unit singles -1967€ 86,00 - BSA C25-B25-B44-TR25W Silencer (40-2841)
Condition: New stock
Replica silencer will fit BSA + Triumph Unit singles 1967-
Inlet dia: 1 3/8" (35mm)€ 96,00 - BSA DBD 34 Clubmans Gold Star silencer RH 42-2896
Condition: New stock
Fits: BSA 500 + British singles and Royal Enfield Bullet 500 Cafe-racer
Inlet dia: 1 3/4"
Made in England by Brituro€ 168,00 - BSA DBD 34 GS Petrol tank (42-8107)
Condition: New stock
Replica part 4-gallon chrome tank, bare for BSA Gold Star club-mans 1958-€ 319,00 - BSA DBD34 - A65 Set of 40 galvanised spokes & nipples for BSA QD hub in 18" wheel rim
Condition: NOS opn. 42-6011 42-6012 + 27-6810
Lenght 175 mm
Dia (9G) = 3.7 mm Steel nipples
Made in England€ 46,00 - BSA DBD34 Rear wheel drum & sprocket for QD hub 49 T 5/8x3/8 chain (67-6124)
Condition: NOS
For side-car offroad use
Made in England€ 154,00 - BSA Gold Star pair of petrol tank badges 65-8193
NOS
Made in England
4" diameter, for 1949-1960
Colour red
OPN 65-8193 (65-8228)€ 57,00 - BSA Goldstar 500 + 350 Clubmans DBD34 Rear mudguard stays RH+LH chrome plated (42-6834 / 42-6836)
Condition: NOS
1964 - 1962
Made in EnglandPriced and sold per set€ 138,00 - BSA Hard Chrome fork stanchions assy c/w bushes & seals (89-5061)
condition: new
Made in England
hard chrome type
comes with bronze top and bottom bushes and oil- seals
length 574mmfits:
DBD34 Gold Star, A7 - A10 twins 1954-1962
B31-B32-B33-B34 1946-€ 232,00 - BSA M20- M21 SV HD chrome plated exhaust pipe (66-2995)
Condition: NOS Made and plated in England Heavy duty steel tubing
1954-1961, 600 cc / 600 sv
Made in England€ 124,00 - BSA M20-M21 chrome plated exhaust pipe (66-2995)
Condition: NOS
Made in England, 500 SV / 500 cc
1952-1956€ 94,00 - BSA M20-M21 Silencer
Condition: N.O.S.
Fits: 500-600 SV Singles 1952
Inlet dia: 1 3/4"
Made in England by Campbell's€ 124,00 - BSA Pair of folding footrests LH + RH 83-5109 + 83-5110
Condition: NOS Made in England Similar Part Numbers : 83-4684/83-4685/83-4505/83-4408 83-2218/83-2220/83-3092
Fits : B25 - B50 - SS - T - MX - Models OIF 1971 - 1973
Made in England€ 212,00 - BSA pre-unit singles Haynes workshop manual
condition: NOS
describes:
BSA B31, 32, 33, 34,
BSA CB32, 34
BSA M20, 21, 33OHV + SV 1954 - 1961
146 pages€ 37,00 - BSA pre-unit singles, silencer
Condition: N.O.S.
Fits: B31-B33 s/arm models 1954-1958
Inlet dia 1 5/8"
Made in England by Brituro€ 144,00 - BSA Rear number plate (90-6748)
Condition: NOS
1964 - 1967
Made in England
Fits A50, A65 and
BSA Bantam types: D7D10,D14, B175, B14€ 49,00 - BSA Rear number plate, open type, complete (65-6819)
Condition: NOS
Complete with Lucas - type rear lamp and reflector
Fits most Pre- Unit Singles & Twins€ 86,00 - BSA rear wheel hub (67-6126 / 67-6136 / 68-6114) - used
condition: used, very good condition c/w bearings-spacer-retaining ring
Made in Englandfits: 350 - 440 - 500 singles + 650 twins
B44 - B31 - B33- DBD34 - M20 - A7 - A10 - A65€ 138,00 - BSA rebound springs for plunger frames (89-4259)
condition: NOS
made in Englanddia: 5/16"x 15/16"
length: 158mmfits: M20-M21-M33 singles + A7-A10 twins -1957
priced per pair€ 77,00 - BSA Rubber knee grips fuel tank (82-9722 / 23)
Condition: NOS
Fits B25, B44 + A65 US-type
Made in England€ 29,00 - BSA set of 40 S/S spokes & nipples for 19" Q.D rear wheels (opn 42-6011-12 / 27-6810)
condition: NOS
Made in Englandtotal length: 204mm
dia: 3,2mm
nipple: 6.5mm€ 72,00 - BSA Singles Hollow swinging arm spindle for cross-over brake models 42-4340
NOS
Made in England
Fits: B31 / B33 -1962
OPN 42-4340€ 44,00 - BSA singles pre-unit dual seat 42-9072
New stock
Made in England
Fits: B31-B33-DB34 swinging arm types 1955-1962
OPN 42-9072€ 224,00 - BSA Speedometer cable A10 Super Rocket / Goldstar 67-9057 Smiths nr 53395
Condition: NOS
Also Fits: B33 - B34 Singles - A7 -A10 Twins S/Arm type
Smiths -type CLN 01 Lenght 3' 10 3/4"
Made in England€ 29,00 - BSA Unit Singles C15 - B40 Front forks outer member damper rod type 65-5410
Condition: NOS
Total Lenght 290 mm
Made in England€ 116,00 - BSA Wall plaque BSA Gold Star Clubman
Condition: N.O.S.
Wall plaque (1977) BSA Gold Star Clubman 135x280mmMade in England
(Sticker not included)€ 15,00 - BSA-TRIUMPH set of 40 S/S spokes & nipples for 18" conical rear hub 37-3724 / 3725 / 3726 / 27-6810
condition: NOS
made in Englandfits: BSA B50MX-T-SS, A65-A75 1971-
TRIUMPH T120 OIF models 1971- Trophy Trail TR5T T25T + T25SS 1971-
spoke dia 3.2mm
nipple dia 1/4€ 72,00 - Chain guard extension 83-2674 + 83-4461
condition: NOS
Made in Englandfits: TR5T - T25T + SS
B50T-SS-H OIF models, B25 1971-1974€ 46,00 - Forged kickstart lever (57-4556 / 42-3037)
condition: NOS
Made in Englandcomes with sundries
fits:
CCM MX opn 57-4556
BSA A10 Super Rocket opn 42-3037
BSA A7 - A10 - B31 - B32 - B33 - B34 swinging arm types€ 138,00 - Front fender support bracket Opn. 97-4359 (97-4075)
condition: NOS
Made in Englandfits BSA & TRIUMPH OIF models 1971 - 1973 Picture was taken upside down.€ 39,00 - Lucas replica 7" head-lamp complete, Partno. SSU700
Condition: N.O.S.
Fits: most British bikes 1950-1960€ 138,00 - Lucas replica universal Headlamp (SSU700-50788F)
Condition: N.O.S.
Fits Royal Enfield - BSA - Norton 1950 -€ 138,00 - Rear mudguard "Fender" stainless steel for BSA & Triumph
Condition: NOS
1971 -
6" wide (145 mm)
Lenght 1300 mm
D-profile 55 mm deep
Pattern as fittet to BSA B50, triumph Twins & Triples
fits 18" + 19" rear wheels
Made in England€ 148,00 - SMITHS tachometer 4:1 RSM 2001/02/02 RPM 12 x 1000
Condition: NOS Made in UK by Smiths Industries
4:1 Ratio
RSM-2001/02 Fits : BSA_Triumph 250 Singles OIF 1971-73 a.o.
60 mm diameter
Fits BSA B25, Triumph T25 SS 1971-1973
and other British bikes€ 196,00 - Smiths tachometer gearbox BG1508-05
Condition: NOS But used for testing for 2 minutes
1-1 Ratio
Will fit BSA Gold Star (65-9164)€ 224,00 - Swinging arm spindle 83-3554
NOS
Made in Englandfits BSA Victor, B50MX - B50SS , CCM, Triumph
OIF 1971-
c/w nut and adjuster + spacertube, bearings, seals and washers
Set of 12 pieces
OPN 83-3554€ 157,00 - Triumph / BSA Speedo/Tacho mounting bracket (97-4529)
Condition: NOS Made in England (Dull chrome-plated) Fitting hole dia. 30.3 mm
For Smiths Speedo or rev. counter
Fits all BSA en Triumph singles and twins, for universal fitting
Cafe racer part€ 47,00 - Triumph / BSA frame + swinging arm (83-2985 + 83-2213) (83-2984 + 83-2212)
Condition: Used but straight and powder coated
1971-1973
Triumph T 25SS + T25T trailblazer
BSA B50T Victor Trail, B50 MX Victor Motor Crossplease contact us for a shipping quote€ 650,00 - Triumph / BSA front brake anchor plate , polished Opn. 37-3971 + 37-3655
Condition: NOS
Plate for conical hub, polished
Fits BSA A65 - A75 - B50 SS 1971 - 1973 OIF
Triumph T120 - T150 1971 - 1973 OIF + Hurricane X75 1973-€ 142,00 - Triumph TR5T Trophy Trail / BSA B50 MX rear swinging arm Opn. 83-4180 (83--2212)2212)
condition: NOS Made in England For Opn. 83-2213 use: 83-2212
will also fit BSA B25 - B50 OIF-types 1971973 + Triumph T25T and T25SSTotal length: Centre to Centre : 410 mm€ 269,00 - Universal Steel front mudguard 19"
Condition: NOS
Width 4.5" Material 1/16" thick. 1 x rolled edge
Fits most British bikes
Made in England€ 138,00