Norton singles - engine parts
- Norton 16H 500cc Side Valve One off : Inlet / Exhaust valve + valve guide
Condition: NOS Will also fit Big Four 490 Side Valve
1933 - 1946
Made in England by Tranco
1 valve + 1 guide per set.Priced and sold per set.€ 39,00 - Norton 16H Hepolite piston STD size 79 mm
for 500cc side-valve
condition: NOS
model years: 1940-1952size: 79mm€ 138,00 - Norton 500 - 600 OHV singles Terry Aero valve springs type ES2 - 19 (21612/3)
Condition: NOS
- 1959
1 set 2 pairs
Made in England
Terry VS421€ 42,00 - Norton 500 OHV singles Terry Aero valve springs ES2 & CS1
NOS Made in England Terry nr. VS343
1 set 2 pairs Outer springs: 65 x 42 mm Inner springs: 58.5 x 33 mm€ 52,00 - Norton laydown gearbox and cover D12/301
Condition: NOS
Fits Singles and Twins
1947 and onwards€ 124,00 - Norton Singles magneto chain cover E8972
Condition: used or shop soiled Very good condition Casting nr. E6972
Type,16 H 16 H WD 500 cc Side valve
1940 -€ 59,00 - Norton AMC outer gearbox cover (04-0133)
condition: NOS
fits all Norton, AJS and Matchless singles and twins
model years: 1956-1968€ 108,00 - Norton Dominator 650 SS, Atlas, ESII kickstart crank complete (040434)
Condition: NOS
1956 - 1970
Made in England€ 128,00 - Norton singles & twins clutch sprocket (A2/384) OPN 04.0366
New Stock Made in England
One-piece improved friction material on both sides
pre AMC-type Fits 1947-1957 Norton Dominators 7-88-99 16H 19 ES2 50 Singles€ 188,00 - HEPOLITE Piston for Norton Type: 50 Std Size opn 18736A (L13/160) Hepolite nr. 13329
Condition: N.O.S.
Hepolite piston
Std size: 71mm
Fits: 350 OHV Single 1956-1963
Made in England€ 158,00 - Norton 16H, ES2 Model 7 + 88 Bush for kick starter axel (A2/364)
Condition: N.O.S.
Genuine bearing bush for laydown gearbox - 1956
Made in UK by Norton Motors€ 42,00 - Norton singles & twins Set of 4 clutch plates plain steel with external tabs (04.3191)
Condition: NOS
1959 - 1972
Fits all singles & twins with AMC-type clutch
Made in England Priced and sold per set of 4.€ 39,00 - Norton 21T Layshaft 3rd gear c/w bush (01 A1 34)
Condition: N.O.S.
Special lowratio gear for Trials & Motocross use
Replaces: 04.0420 20T gear
Made in England by Quaife Engineering, Tonbridge€ 138,00 € 98,00 - Norton Manx 30+40 Big end bearing (N5M)
Condition: N.O.S.
Bearing assy c/w cage, rollers + outer ring
Fits: Manx 30+40, 350+500CC, 1946-1959
No nuts supplied!
Made in England by Alpha Bearings, Dudley€ 324,00 - Norton Manx 30+40 Big end bearing assy (N6)
Condition: N.O.S.
Bearing assy c/w cage, rolller + outer ring
No castle nuts supplied!
Fits: Manx 30+40, 350+500CC, 1960-1963
Made in England by Alpha Bearings, Dudley€ 324,00 - Norton Conrod + S.E.bush (Castingnr: E4101; Bush: E4102)
Condition: N.O.S. Made in England by Norton Motors
Genuine Norton conrod for S.V. + OHV Singles -1957 Total length: 250 MM.€ 94,00 - Norton ES2 - 18 -19 Valve + guide (A3-142, V37 / AS-140, G269)
Condition: N.O.S.
Inlet/exhaust valve + valve guide
Fits: 500+600 OHV singles 1935-1954 ES2 + Type 18 (500 OHV) 1935-1958 Type 19 (600 OHV)
Made in England by Alpha Bearings, Dudley€ 42,00 - Norton ES2, 18, 19, 500T Valve+PB guide (A3-142, V37/ D3T-140, G269PB)
Condition: N.O.S
Inlet/exhaust valve + bronze valve guide
Fits: 500-600 OHV singles: 1955-1958 Type 18 - ES2 _ 500T 1959-1963 ES2
Made in England by Alpha Bearings, Dudley€ 54,00 - Norton ESII-19S- 50 Exhaust pipe locking nut, Partno. 18197 (A3/167)
Condition: N.O.S., replica
Fits: 350-500-600 OHV SinglesSupplied c/w sealing ring A3/166
Made in England€ 43,00 € 39,00 - Norton ES2-19S-50 Exhaust pipe locking nut SS, Partno. 18197SS (A3/167 SS)
Condition: New stock
Fits: All 350-500-600cc singles -1963Supplied c/w exh.gasket A3/166
Made in England€ 58,00 € 49,00 - Norton 16H Inlet camshaft
Condition: N.O.S.
40 teeth
Width: 3/8"
Outerdia: 2 5/8"
Length spindle: 2 11/16"Made in England€ 118,00 - Norton ES2 + 16H piston ring set GPM STD size + 3 oversizes
condition: NOS
GPM Made in Italy Chrome top ring + Wide oilring (4 mm)Hepolite Made in England Narrow oilring 1/8"
fits all 500 singles: SV + OHV
sizes available: STD = 79 mm +.020" mm = 79.5 mm +.030" =79.75 mm +.040" = 80 mm.…€ 57,00 - Norton 16H S.V. Camshaft inlet
Condition: N.O.S. or used ?
Fits: Most side valve singles 40T
Width: 3/8"€ 92,00 - Norton AMC-type gearbox Kickstart spindle c/w sundries, Partno. 04-0477/06-6169/04-0114
Condition: N.O.S.
Fits: All Norton-AJS-Matchless singles & twins 1956-1976c/w 04-0033 pin 04-0044 spring 04-0069 plunger 06-2015 pawl 04-0146 bush
Made in England€ 218,00 Fits: Model 1 1938-1947 16 H WD 1930-1947 (One gasket has two sides)
Cylinder head gasket Norton Side-valve engines Part No. 6109 + A2/137For Model 1 1938 - 1947 + 16 HWD 1930- 1947
€ 24,00- Norton ES2 - 19S Engine gasket set, Partno. 19705 etc
Condition: N.O.S.
Fits: 1957-1966 500-600 OHV SinglesMade in England by Payen€ 37,00 - Norton ES2 + 18 Engine gasket set 1946-1947
Condition: N.O.S.
Fits: 500cc OHV Singles 1946-1947Made in England by Payen€ 44,00 - Norton Model L7 - 16H - ES2 Kickstart spindle c/w bronze bush for laydown gearbox (AZ/353)
Condition: Used, splines okay, not cracked
- 1956
Total length 120 mm€ 168,00 - Norton ES2 - MK2 pair of valves & guides Opn : 02-6028 02- 6029 02- 6030 02-6519
Condition: N.O.S.
Fits 500 OHV singles 1964-1966
Made in England by Alpha Bearings€ 84,00 - Norton BIG4 - ES2 - 18 - 16H - 500T - Inter Kickstart spindle c/w bush for upright gear box (9101)
Condition: NOS
Total length 132 mm
Made in England€ 198,00 - Norton 16H tappet inspection cover, Partno. 3697
Condition: N.O.S.
Fits: 500-600 SV singles -1954€ 39,00 - Norton ES 2-19-50 Magneto chain cover, Partno. A2/9 (18195)
Condition: Used Casting nr. 7535 Very small superficial crack on lowe part of cover (not through and trough)
Fits: OHV Singles 1956-€ 57,00 - Norton gearbox cover for "Dolls head" gearbox Casting nr. N8113 VAF Patent No 424154
Condition: NOS
Fits Norton Singles 1934 - 1947
Casting no: N8113
Patent no: 424154€ 49,00 - Norton 50 - 350 OVH Hepolite piston ring set R3742
Condition: NOS
Fits Norton 50 - 350 OHV Singles 1956 - 1963€ 39,00 - Gearbox outer cover, Partno. 04-0133 (02-8535)
Condition: N.O.S.
Fits: AMC-type gearbox 1957-1969
Types: Norton 88-99-50-ES2 650SS - Atlas - G15
/ AJS & Matchless 16M-G3L 18-G80+C+CS G9-11-12 33CRS-G15Casting NR: 04-0406 Clutch cable with adjuster in g.box outer cover
Made in…€ 158,00 - Norton ES2+18 Payen gasket set 500 OHV
Condition: N.O.S.
Norton ES2+18 payen gasket set 500 OHV 1946-1947Made in England€ 44,00 - Norton Dominator + ES2 Front chaincase (19401) (L4/485)
Condition: Used, no dents, suitable for painting
Foits Singles & Twins - 1975 (MAG + DYNO - type
Made in England€ 178,00 € 138,00 - Norton Singles crankshaft bearing set Opn A2/32 + A2/30
condition: NOS, Made in UK by RHP
fits: Norton Model 1 Big 4 ES2 18 16H 50 1934-1964contains:
2x Roller type bearing LRJA1J (A2/32) RL10L
1x Ball type bearing LJ1JC3 (A2/30) LS10€ 196,00 - Norton ES2 - 16H piston ring set GPM Std + Oversizes (opn 19778-79) A2/161 A2/162
condition: NOS Made in Italy Std = 79 mm +.020" = 79.5 mm +.040" = 80 mm. +.060"= 80.5 mm
Width 1/16" Piston rings 1/8" oil ring€ 47,00 - AJS / Matchless Hepolite piston ring set for 750 twins (opn R18020)
condition: NOS
fits:
AJS33, Matchless G15 1965 - 1967
Norton Atlas P11-P11A-NC15CS-Commando -1972Hepolite nr R18020€ 68,00 - Norton chaincase sealing rubber A2486
condition: NOS
Made in Englandlength : 110cm approx.
width: 17mmfits dynamo type singles & twins€ 29,00 - Norton chaincase rubber band NM13185 (A2-486 / 06-7627)
condition: NOS
Made in Englandfits: singles & twins 1949-1968€ 22,00 - Norton 16H exhaust lifter cable cplt 9302-9305
condition: NOS
Made in Englandc.w. adjuster
fits sidevalve 500 - 600cc 1949-1956€ 27,00 - Norton Manx 30 big end bearing assy N-5-M
condition: NOS
Made in England by Alpha Bearings Dudleyfits Manx 500 1946-1959 Supplied without Castle nuts.€ 324,00 - Norton Manx type 30 + 40 big-end assy N6
condition: NOS
Made in England by Alpha Bearings Dudleyfits 500 + 350cc 1960-1963€ 324,00 - Norton ES2 MK2 Alpha big end bearing AMC20
condition: NOS
Made in England by Alpha Bearings Dudleyfits Norton ES2 Mk2 1964-1966€ 324,00 - Norton ES2 front chaincase 19401 + L4/485
Fits type 50-19S-18-ES2 + (Dominator 7)
Condition: used + hole for clutch adjusting
Made in England€ 138,00 - Norton Model 7 + Singles Kickstarter Axle c/w K.S. crank A2/353 A2/360
Condition: Used but very good condition with new K.S. pawl
Fits: Singles: 16H Big4 ES2 & Twins - 1955
Made in England€ 158,00