Wasp Sidecar-cross
Wasp sidecar wheel hub cast alloy 36 holesCondition: Used
Fits Wasp - E.M.L - SPP - Hagon
For 7/8" or 25 mm wheelspindle€ 98,00
Sidecar wheel hub steel nickel plated 40 HCondition: NOS
Fits EML - SPP - Wasp - Hagon
40 H 25 diameter wheel spindle€ 145,00
Wasp sidecar cross Steel disk, 6 hole 215 mm o.d. 52 I.D. 5 mmCondition: NOS
Fits all rearwheels with disk-brake and front wheels with small disc€ 72,00
Wasp sidecar cross Rear wheel sprocket steel, anodised disc type, 530 chain 52TCondition: NOS
8 holes, 58 mm hole
Made in England€ 74,00
Wasp sidecars Rear wheel sprocket for disc brake (dural) 48-50-52 TCondition: NOS
Available in 48 - 50 - 52 Tooth for 530 chain
Made in Italy by AFAM€ 64,00
Wasp sidecars Rear wheel sprocket for disc brake (dural) 41 TCondition: NOS
Available in 41 Tooth for 630 chain only
Made in Italy by AFAM€ 72,00
Wasp sidecar cross Swinging-arm for RH sidecarCondition: NOS
1974 -
Wheelspindle dia : 7/8"
Lenght: center to centre 210 mm (spindle & bearings available)
Made in England€ 158,00
Wasp sidecar cross Rear swinging-arm assy (420 mm)Condition: NOS
1972 - grass-track side-car outfit
Lenght centre to centre 420 mm
Made in England€ 196,00
Wasp side-cars Front fork assy c/w swinging-arm en bushesCondition: NOS
Fits 1972 - grass-track sidecar outfit
Stanchions: total lenght 610 mm, S-arm lenght 235 mm
(pivot - axel)
Made in England€ 395,00
Wasp side-cars Set of 40 galvanised spokes & nipples for 16" side-car wheel with BSA QD hubCondition: NOS
Lenght 175 mm
Dia (9G) = 3.7 mm
Made in England€ 56,00
Wasp side-cars Set of 40 galvanised spoken & nipples for 18" disc rear wheelCondition: NOS Steel spokes and nipples
Fits Wasp sidecar outfits 1976-
Lenght: 195 mm
Dia: (9G) = 3.7 mm
Made in England€ 56,00
Wasp side-cars Set of dural engine plate for grass-track outfit with Norton Commando engine & gearboxCondition: NOS
Made in England€ 158,00
Wasp sidecars front fork stanchionsNOS
Made in England
Fit: RT15AZ type chassis ± 1982-
Total length: 740mm
Stanchions: 1¾" diameter
Will take twin disc front wheel€ 380,00
Wasp sidecar cross, folding footrest assy, left hand onlyNOS
Made in England
Fixing holes 48mm€ 68,00
Wasp sidecar cross, Twin Air, foam air filterNew stock
Made in Holland
Large type: 10cm wide
Comes with filter frame€ 44,00
Akront alloy wheel rim 19" x 1.85" (67mm wide) 40 holesNOS
Made in Spain
Fits full width hubs€ 138,00
Akront alloy wheel rim 17" x 2.75" (93mm wide) 40 holesNOS Made by AKRONT
Made in Spain
Fits full width hubs€ 138,00
Continental airbag for rear suspensions of Wasp & E.M.L. MX-sidecar outfitsNOS
Made in Germany
LH + RH 1975 - 1977
OPN: 603N€ 115,00
Wasp sidecar MX airbag suspension unit 603NNOS
Made in Germany
Fits: 1975 - 1977 type sidecar chassis
Continental airbag
OPN: 603N€ 320,00
Akront alloy wheel rim 17" x 2.75" (93mm wide) 40 holesNOS
Made in Spain
Fits full width hubs
Gold anodised€ 138,00
Wasp MX handle barsCondition: N.O.S.
High tensile tubing competition h.bars
made for sidecar cross
width: 770mm
Made in England€ 64,00
Doherty-Venhill Twin carb. throttle setCondition: N.O.S.
Quick action twistgrip + Venhill Teflon control cablesMade in England
(Sticker included)€ 63,00
Wasp-type Rear swinging arm c/w spindles and chain-adjustersCondition: N.O.S.
Width: 27cm (rear), 24cm (front)
Length: 49cm (center to center)
Weight: 4.25kgReynolds tube, sif welded, nickel plated
Made in England€ 344,00
Rearwheel / swinging arm spindle + locknutsCondition: N.O.S.
Steel spindle
Dia: 11/16"
Length: 300mmMade in England€ 36,00
Wasp RT2 Rear brake cable & sundriesCondition: N.O.S.
Fits: Rearwheel with drum brake
Total length: 475mmMade in England
(Sticker not included)€ 37,00
Wasp Sidecar MX Front wheel hubCondition: Used with new bearings
Fits: Wasp MX Sidecars with disc brakes (40 holes)€ 160,00
Wasp Set of 40 Spokes & Nipples for Spokes for 17" Disc Brake Rear wheelsCondition: N.O.S.
Set cplt of 40 bright steel zinc plated spokes + steel nipples for 17" disc rear wheel
Spoke sizes 172 x 4 mm Nipple dia 7.8 mm: Made in England€ 48,00
Wasp Velorex Sidecar swinging arm spindle + nut (steel/plated)Condition: N.O.S.
Dia: 17 mm, Length: 155 mm
Made in England
Sticker not included€ 29,00
Wasp Velorex Sidecar Wheel spindle + nut (steel/plated)Condition: N.O.S.
Dia: 7/8"(22.2 mm)
Total Length: 190 mm
Made in England
Sticker not included€ 35,00
Wasp Velorex Sidecar Wheel spindle + nut (steel/plated)Condition: N.O.S.
Dia: 25 mm
Total length 185 mm
Made in England
Sticker not included€ 36,00
Wasp Sidecar-cross Front Forks c/w swinging arm & sundriesCondition: N.O.S.
Fits early Wasp outfits
Total lenght 620 mm€ 345,00
Wasp Sidecar-cross Grass Track Front Forks c/w sundriesCondition: N.O.S.
Fits early Wasp outfits
Total lenght 600 mm€ 345,00
KTM Steering head set for sidecar-MX S/arm fork stanchions (564.01.032 / 564.01.034)Condition: Used
Dia: 54 mm Bottom yoke, 40 mm topyoke€ 224,00
Wasp Folding footrest assy LH onlyCondition: NOS
Fixing holes at 45 mm
Fits RT2 - RT15 frames 1971- Also Rickman Metisse frames with pre-unit engines.
Made in England€ 68,00
Wasp Rear swinging arm RT15AZ - typeCondition: NOS
Complete with needle bearings
Leght 520 mm, width FR. 220 mm R. 265 mm
Chain adjustable 40 mm dia
Made in England€ 398,00
