Wheels

Wheel, Hub and Spoke Parts

A wire wheel is an assembly, and the bits of it that actually wear are rarely the bits people order. Spokes corrode and stretch at the nipple, hub bearings and seals give up long before the shell does, and a wheel that has been apart a few times loses its true because the nipples were over-tightened, not because the hoop is bent.

We list wheel components for British and Czech classics: hubs and hub hardware, spoke and nipple sets, bearings, seals and spacers, spindles and the fittings that locate a brake plate.

Brands & Models
Brands & Models
Tags
Tags

Hub first, then the rim

Spokes are cut to a length and bent to an angle that suit one hub and one rim diameter together. Change either and the set no longer laces up square, however close the length looks written down. Count the holes in both hub flanges and in the rim, and note whether the wheel is laced two-cross or three-cross. Offset is the other thing to settle: a rear wheel has to line up with the gearbox sprocket, and a hub taken off another model will often sit a few millimetres across from where it should.

What we hold

  • Hubs and shells: with bearing retainers, dust covers and hub hardware
  • Spokes and nipples: in matched sets where we can supply them
  • Bearings and seals: wheel bearings, spacers and grease seals
  • Spindles and adjusters: spindles, nuts, chain adjusters and torque arm parts

Rebuilding rather than replacing

If the wheel is coming apart on the bench, photograph the lacing before you cut the old spokes out, and send us the markings off the hub and the rim. That is usually enough for us to confirm a set.